How to clean the nano spray water replenisher? How to clean the water tank?

Many girls who love beauty are afraid of dry skin and dehydration in winter. At this time, a hydrating device would be great. The water tank and body of the nano spray hydrating device need to be cleaned after using it for a period of time! Cleaning is very simple and very necessary! So, how to clean the nano spray hydrating instrument?

How to clean the nano spray water replenisher

Pour out the remaining water in the water tank, add water and shake the machine vigorously for 1 minute, then pour out the water, and repeat 3 times. It is recommended to shake the water tank with the mouth facing downwards. Then use a cotton swab to gently wipe the inner and outer spray ports, add water again and shake for 30 seconds, and the cleaning is complete.

Cleaning of water tank

If there is residual water in the water tank, pour out the original mineral water in the tank! Then add half a tank of new mineral water into it, shake the machine vigorously for 1 minute and pour out the water, and repeat this action 3 times. It is recommended to shake the water tank with the mouth facing downwards. Then use a cotton swab to gently wipe the inner and outer spray ports, add water again and shake for 30 seconds, pour out the water and the cleaning is complete! In fact, it is better to add rice when washing. Add the prepared rice into the water tank! You don't need a lot, about 20 pills will be enough. At the same time, add half a tank of mineral water to the water tank! And shake it hard! Then pour out the rice + mineral water! Add water repeatedly until the rice is completely poured out!

Cleaning of the fuselage

The cleaning of the water tank above has been completed, and now we will clean the fuselage! Place the device upright and pour a small amount of medical alcohol into it! Slide open the body cover! Spray the alcohol! And spray all the alcohol! (Medical alcohol should be used at a concentration of 75%!) Use a cotton swab dipped in a small amount of alcohol to wipe the water tank interface and the atomization port! After spraying out all the medical alcohol, pour mineral water into the water tank interface and spray it all out as well! What needs to be noted here is that mineral water needs to be added several times! Repeated spraying will achieve better cleaning effect! Finally, invert the fuselage and water tank! Tighten the fuselage and water tank clockwise! Installation Completed! At this point, the cleaning of the water replenisher has been completed! Slide open the slider! Enjoy it to your heart's content.

How often should the nano spray hydrating instrument be cleaned?

The water replenisher must be cleaned at least once every 3-5 days to ensure normal spraying! If the water filling device is not cleaned in time, it will leak! Also, it is okay to clean the body, but it is best to clean the water tank after each use to avoid crystals clogging the mist outlet of the spray hydrating instrument, otherwise it will affect the spraying of water mist.