How to add water to the water replenishing instrument? What to do if the water replenishing instrument does not produce water?

Many people have used the hydrating device, which is a skin care product. So how do you add water to the hydrating device? What should I do if the water replenishing instrument does not produce water?

How to add water to the water replenishment instrument

When filling water, unscrew the transparent water tank, fill the tank with water and then tighten it. Push the slide down to use. The small spray will be repeatedly tested three times for 72 hours before leaving the factory, so the small spray tank you just received may be foggy, and it will often stop spraying in the early stage because gas enters during the test. It will be smooth after using it a few more times!

mineral water

Mineral water contains a variety of minerals and trace elements needed by the human body, especially orthosilicic acid. Orthosilicic acid is one of the essential elements in the connective tissue of human skin. It can keep the skin delicate and fair, enhance the elasticity of the skin, and reduce wrinkles. Recommended mineral water brands include: Baishuishan, Evergrande Ice Spring, Nongfu Spring, Kunlun Mountain, etc.

Toner

Toner itself has many beauty and skin care functions, and it is one of the daily skin care products we must use every day. Now we just add toner to the hydrating device and use it in the form of a spray. Therefore, it not only retains the original function of the toner, but also allows the skin to absorb it better.

What to do if the water replenishing instrument does not produce water

First, make sure that the water you add is OK! There are no impurities! It is recommended to clean the water tank and clean the water outlet with a cotton swab! Shake the body during use to increase the pressure in the bottle

1. Air may have entered the water tank. You can shake the machine and turn on the switch to try again.

2. It is possible that when the spray head was atomizing, the water mist formed water droplets and blocked the nozzle. You can wipe it with a cotton swab.

3. It may be a problem with the water. Some tap water will not spray out mist, so you must use the recommended water, such as Baishuishan, Nongfu Spring, etc.

4. The machine may be running out of power. Please charge it fully and try again.