Why can't the nano spray water replenishing instrument spray? Check these 6 factors

Nano spray hydration instrument is an instrument that processes liquid water through the instrument to atomize nano molecules to form a spray. The biggest benefit of a hydrating device is to replenish moisture to the skin. If you are troubled by dry skin in winter, carry one in your bag. But, why does the nano spray hydrating instrument fail to spray sometimes? What went wrong?

Why can't the nano spray water replenishing instrument spray out?

1. The switch has not been turned on.

2. There is no water in the water tank.

3. There may be something wrong with the water you add, and the nozzle outlet may be blocked. Nano spray hydrating device is usually added with mineral water, which has a good effect. The metasilicic acid in mineral water can be quickly and effectively absorbed by the skin. While replenishing water, it can help increase skin elasticity, smooth out fine wrinkles on the skin, and make the skin shiny and tender. You can also add toner that can be dissolved in mineral water. Dilute the toner with mineral water in a ratio of 1:9. Generally, do not use water that contains oils, such as essential oils, or even milk. Some tap water may not produce mist. So be sure to use the recommended water. Make sure there is no problem with the water you add! No impurities! It is recommended to clean the water tank and use a cotton swab to clean the water outlet! Replace the water tank with clean mineral water and shake it.

4. Air may have entered the water tank. Shake the body during use to increase the pressure inside the bottle! Turn on the switch and try again.

5. The machine may be running out of power. Please charge it fully and try again.

6. It is possible that when the spray head was atomizing, the water mist formed water droplets and blocked the nozzle. You can wipe it with a cotton swab.

What to do if the spray of the nano spray hydrating instrument is very small

1. Clean the water replenishing instrument regularly to prevent the nozzle from being blocked, and the sprayed mist will naturally return to normal.

2. Fully charge the hydrating device. The hydrating device can only spray mist when it is fully charged. Shake it before use so that the hydrating device can operate normally.

3. In addition to regular cleaning every week, I will teach you a little trick to restore the spray of the hydrating instrument to its original state. Remove the water tank, fill the bare machine with a small amount of mineral water or purified water, turn on the switch and put it in working state, blow the water inlet with cold air from a hair dryer, blow for a while and pour out the water, repeat several times, the effect is great, remember to use cold air! This method is ultimately about cleaning the spray nozzle.

Misunderstandings about using water replenishment instrument

Myth 1: The longer the moisturizing spray forms water droplets on the face, the better

Usually after spraying the moisturizing spray, we will gently pat our face with our fingertips to help the skin better absorb moisture. However, as the water evaporates, the salt crystals remaining on the skin surface will absorb water from the inside of the skin to the outside, and will take away the moisture inside the skin. Therefore, in order to better replenish water, do not let water droplets stay on your face for a long time!

Myth 2: After spraying, let the spray dry naturally

A regular moisturizing spray is fine, just pat it gently to help it absorb. If it is a steam spray, press the face with a tissue after about 20 seconds to wipe off the excess water, otherwise it will take away the skin's own moisture and make the skin drier. Because steam is generally hypotonic, it is not easily absorbed by the skin. If it remains on the face, it will accelerate the loss of moisture from the skin.