Is it better to use a cold spray or a hot spray? How about a cold and hot dual spray?

Nowadays, many people are using spray-type hydrating devices to hydrate their skin. The water added to the device can be divided into hot water and cold water, so it is divided into hot spray and cold spray. So, is it better to use a cold spray or a hot spray?

Is it better to spray cold or hot water?

It depends on the specific situation.

Both cold spray and hot spray have the functions of hydrating and cleaning, but in addition to this, they have some other functions, which is their main difference.

In addition to the fixed functions of hydration and deep cleansing, cold spray is mainly effective in shrinking pores. It also uses the principle of thermal expansion and contraction, and is especially suitable for oily skin and skin with large pores. It can gently remove dirt from the pores and effectively shrink the pores to make them smaller. The cold spray soothes, calms, cools and repairs.

The hot spray can mainly help open the pores, clean the dirt on the skin, and enhance the skin's absorption capacity. It is very suitable for use after cleansing, so that the skin care products used later can be better absorbed by the skin.

Then, in addition to the difference in effectiveness, you should also consider your skin type when using it. If you have dry skin, it is recommended to use cold spray. If hot spray is not used properly, it will make your skin drier.

How to use the hot and cold double spray of the water replenishment instrument

Cold spraying and hot spraying can be carried out at the same time, and the effect of cold and hot spraying at the same time will be better. In life, it is more recommended to use the two together. However, when performing both treatments at the same time, it is generally recommended to use hot spray first and then cold spray. The hot spray used first helps open the pores of the skin, cleans the dirt on the skin and replenishes moisture. The cold spray used later helps shrink the newly opened pores and enhances the effects of hydration and cleansing. It’s the same principle as washing your face.

How to use the cold spray and hot spray of water replenishment instrument

The specific operations of cold spray and hot spray are similar, except that the water temperature is changed.

1. Rinse the water replenisher with clean water first.

Cold spray:

Add liquid water at room temperature into the water tank of the hydration device, such as mineral water or toner and mineral water in a ratio of 1:9. Do not add tap water, purified water or distilled water.

Hot spray:

Put the mineral water bottle to be used into hot water to heat it. Remember to touch the bottle frequently to feel the water temperature. A temperature of around 30 degrees is most suitable for hot spraying, which is close to human skin but slightly lower than body temperature. Pour the heated water into the water replenisher.

3. Turn on the water replenishing device. Place the hydrating device at a 45-degree angle and 15 cm away from your face and spray for about 15-20 minutes.

4. Use a tissue to press away excess moisture on your face to prevent it from drying naturally. No need to wash your face after pressing out excess moisture.

Is the water replenishment device effective?

The reputation is still good.

The nano-scale water molecules formed by the atomization of the hydrating device can quickly penetrate the skin and quickly hydrate the skin. When your skin feels tight and uncomfortable, you can replenish moisture for your skin at any time. It can be used repeatedly several times a day to replenish moisture to the skin in time.